4-44
Starting and driving
4
Accelerator pedal
Use the accelerator pedal to reach your desired speed and then
push the “COAST SET” switch (B) and release the switch
momentarily to set a new desired cruising speed.
To decrease the set speed
E00609500340
There are 2 ways to reduce the set speed.
“COAST SET” switch
Press and hold the “COAST SET” switch (B) while driving at
the set speed, and you will slow down (coast) gradually.
When you reach desired speed, release the “COAST SET”
switch. Your cruising speed is now set.
To decrease the speed in small amounts, press the “COAST
SET” switch (B) for less than 1 second and release it. Every
time you press the “COAST SET” switch (B), the speed will
decrease by approximately 1.6 km/h (1 mph).
To Next Page
Loading...
