Locking and unlocking
1-7
1
To lock
Press the LOCK switch (1), and all doors and the tailgate will
be locked. The turn-signal lamps will blink once when the
doors are locked.
OTE
● With a vehicle that has a Dead Lock System, Pressing the
LOCK switch (1) two times in succession causes the Dead
Lock System to be set (refer to “Setting the system” on
page 1-40).
To unlock
Press the UNLOCK switch (2), and all doors and the tailgate
will be unlocked. If the doors are unlocked when the room
lamp switch is in the (DOOR) position, the room lamp will
illuminate for approximately 15 seconds and the turn-signal
lamps will blink twice.
OTE
● The indicator lamp (3) comes on each time a switch is
pressed.
● If the UNLOCK switch (2) is pressed and any of the doors
or tailgate is not opened within approximately 30 seconds,
relocking will automatically occur.
● It is possible to modify functions as follows:
For further information, please contact your authorized
MITSUBISHI MOTORS dealer.
• The time for automatic relocking can be changed.
• The confirmation function (blinking of the turn-signal
lamps) can be set to operate only when the doors or tail-
gate are locked or only when the doors or tailgate are
unlocked.
• The confirmation function (this indicates locking or
unlocking of the doors or tailgate with the blink of the
turn-signal lamps) can be deactivated.
• The number of times the turn-signal lamps are blinked
by the confirmation function can be changed.
To Next Page
Loading...
Need help?
General
