5-38
For pleasant driving
5
To find the start of each track on a disc for playback
Press the SCAN button (10). “SCAN” will appear on the dis-
play (22) and the CD player will play back the first 10 seconds
of each track on the disc. The track number will blink while the
scan mode is selected.
To exit this mode, press the button again.
OTE
● Once all tracks on the disc have been scanned, playback
of the disc will restart from the beginning of the track that
was playing when scanning started.
● The scan mode will be cancelled when radio or CD opera-
tion is selected.
● With a disc that contains both CD-DA and MP3 files, the
scan mode causes only files of the same format (CD-DA
only or MP3 files only) to be played.
To eject discs
When the eject button (11) is pressed, the disc automatically
stops and is ejected. The system automatically switches to
radio mode.
OTE
● If you do not remove an ejected disc before 15 seconds
have elapsed, the disc will be reloaded.
CD text and MP3 title display
E00725000139
This CD player can display CD text and MP3 titles, including
ID3 tag information (version 1).
CD text
The CD player can display disc and track titles for discs with
converted disc and track title information. Press the DISP but-
ton (5) repeatedly to make selections in the following
sequence: disc name → track name → normal display mode.
OTE
● The display can show up to 12 characters. If a disc name
or track name has more than 12 characters, press the
PAGE button (4) to view the next 12 characters.
● When there is no title information to be displayed, the dis-
play shows “NO TITLE”.
● Characters that the CD player cannot display are shown as
“•”.
Example
Disc
name
Track
name
To Next Page
Loading...
Need help?
General
