Mitsubishi Outlander 2007 - Page 338

For pleasant driving
5-57
5
N
OTE
● If there are multiple empty slots, you can select your
desired slot by pressing the DISC buttons (12 or 13).
● If you do not insert a disc for about 15 seconds after the
autochanger starts standing by for loading, the loading
standby mode will be cancelled.
To set all the discs
1. Press the LOAD button (5) for 2 seconds or longer (until
you hear a beep).
2. The autochanger will select the lowest-numbered empty
slot and switch to loading standby mode.
3. When the display shows “LOAD DISC No. (1-6)” insert a
disc. The autochanger will then automatically select the
next empty slot and enter loading standby mode.
4. Repeat the above-described steps until every slot contains
a disc. Playback will then begin with the disc that you
inserted last.
N
OTE
● If you press the LOAD button (5) again while the auto-
changer is in loading standby mode, the loading standby
mode will be cancelled.
To eject discs
To eject a single disc
Press the eject button (15) briefly to eject the currently selected
disc.
N
OTE
● If you press the eject button (15) while the display is
showing “LOAD DISC No. (1-6)”, the loading standby
mode will be cancelled and the next disc will be ejected.
● If you do not remove an ejected disc before 15 seconds
have elapsed, the disc will be reloaded and the eject mode
will be cancelled. The reloaded disc will not be played.