For pleasant driving
5-59
5
To listen to an MP3 CD
This autochanger allows you to play MP3 (MPEG Audio
Layer-3) files recorded on CD-ROMs, CD-Rs (recordable
CDs), and CD-RWs (rewritable CDs) in ISO9660 Level
1/Level 2, Joliet, and Romeo formats. Each disc can hold up to
255 files in up to 100 folders, up to a maximum of 16 levels.
The ID3 tag information (version 1) can be displayed during
MP3 playback. For information concerning ID3 tags, refer to
“CD text and MP3 title display” on page 5-72.
Push the CD button (2) if the discs are already in the CD auto-
changer.
The display shows “READING”, then playback will begin.
The folder number, the track number, the playing-time, and
MP3 indicator will appear on the display.
OTE
● While listening to a disc on which CD-DA (CD-Digital
Audio) and MP3 files have both been recorded, you can
switch between reading of the CD-DA and reading of the
MP3 files by pressing the CD button for 2 seconds or
longer (until you hear a beep).
● With a disc that contains both CD-DA and MP3 files, the
CD-DA files are automatically played first.
● The playback sound quality differs depending on the
encoder software and the bit rate. For more information,
refer to the owner’s manual for the encoder software.
● Depending on the layout of the files and folders on the
disc, it may take some time until playback starts.
● MP3 conversion software and writing software are not
supplied to this unit.
● You may encounter trouble in playing an MP3 or display-
ing the information of MP3 files recorded with certain
writing software or CD recorders (CD-R/RW drivers).
● If you write many folders or files other than MP3 files, it
may take some time until playback starts.
● This unit does not record MP3 files.
● For information on CD-Rs/RWs, refer to “Notes on CD-
Rs/RWs” on page 5-72.
CAUTION
!
● Attempting to play a file not in the MP3 format that
has the “.mp3” file extension may produce noise
from the speakers and speaker damage, and can sig-
nificantly damage your hearing.
To Next Page
Loading...
