5-78
For pleasant driving
5
Hands-free Bluetooth
®
cellular phone
interface system with voice recognition*
E00726000022
The Hands-free Bluetooth
®
cellular phone interface system
with voice recognition uses a wireless communication technol-
ogy known as Bluetooth
®
to allow you to make hands-free
calls in your vehicle using your Bluetooth
®
compatible cellular
phone with Hands-free profile.
The system is equipped with a voice recognition function,
which lets you make hands-free calls by simple switch opera-
tions and voice command operations using a defined voice tree.
The Hands-free Bluetooth
®
cellular phone interface system
with voice recognition can be used when the ignition switch is
in the “ON” or “ACC” position.
To use the Hands-free Bluetooth
®
cellular phone interface sys-
tem with voice recognition, you should first connect your Blue-
tooth
®
compatible cellular phone to the Hands-free Bluetooth
®
cellular phone interface system with voice recognition. Refer
to “Pairing a cellular phone” on page 5-86.
OTE
● You cannot use the Hands-free Bluetooth
®
cellular phone
interface system with voice recognition if your cellular
phone has a dead battery or is turned off.
● Hands-free calls will not be possible in areas outside your
cellular phone service area or locations where a signal
cannot reach your phone.
Bluetooth
®
is a registered trademark of BLUETOOTH SIG,
INC.
WARNING
!
● Although the Hands-free Bluetooth
®
cellular phone
interface system with voice recognition allows you to
make hands-free calls, you should do so only after
parking your vehicle in a safe area. Refrain from
making calls while driving as much as possible.
If you use a cellular phone while driving, make sure
it does not prevent safe driving. Anything, including
cellular phone usage, that distracts you from the
safe operation of your vehicle increases your risk of
an accident. Refer to and follow all state and local
laws in your area regarding cellular phone usage
while driving.
To Next Page
Loading...
Need help?
General
