Mitsubishi Outlander 2007 - Page 413

5-132
For pleasant driving
5
1. Move one of the sliders (C) toward the inside of the vehi-
cle, and fit the tab (D) into the installation hole that is to
be used. Move the opposite slider in the same fashion.
2. After changing the position, gently shake the entire cargo
area cover to make sure it is securely retained.
N
OTE
● If the rear seat seatbacks make contact with the cargo area
cover, move back the cargo area cover.
The cargo area cover could break if it supports the seat-
back of the rear seat.
To remove
1. Wind up the cargo area cover.
2. Move one of the sliders (C) toward the inside of the vehi-
cle and lift it to remove the cargo area cover.
To fit the cargo area cover, follow the removal steps in reverse.
Gently shake the entire cargo area cover after fitting it to make
sure it is securely retained.