6-8
For emergencies
6
5. Check the coolant level in the reserve tank (A). 6. Fill the reserve tank with coolant as needed (refer to the
“Maintenance”).
7. Examine the radiator hoses for coolant leakage and the
drive belt for looseness or damage.
If there is anything wrong with the cooling system or
drive belt, we recommend you to have it checked and
repaired.
WARNING
!
● If there is none, make sure that the engine has
cooled down before removing the reserve tank cap
(B), because hot steam or boiling water otherwise
will gush from the filler port and may scald you.
FULL
LOW
CAUTION
!
● Add the coolant a little at a time while running the
engine, to prevent engine damage.
To Next Page
Loading...
