6-30
For emergencies
6
8. Lower the vehicle slowly by rotating the wheel nut
wrench anticlockwise until the tyre touches the ground.
9. Tighten the nuts in the order shown in the illustration until
each nut has been tightened to the torque listed here.
Tightening torque 88 ~ 108 N•m
(Achieved by applying force of 350 to 420N at end of
wheel nut wrench supplied with vehicle)
CAUTION
!
● Never use your foot or a pipe extension for extra
force in the wheel nut wrench. If you do so, you will
tighten the nut too much.
To Next Page
Loading...
