8-6
Maintenance
8
6. Remove the dipstick and read the oil level, which should
always be within the range indicated
7. If the oil level is below the specified limit, remove the cap
located on the cylinder head cover and add enough oil to
raise the level to within the specified range. Do not over-
fill to avoid engine damage. Be sure to use the specified
engine oil and do not mix various types of oil.
8. After adding oil, close the cap securely.
9. Confirm the oil level by repeating step 4 to 6.
Use only the recommended oils with an ACEA or API classifi-
cation as specified in this manual.
OTE
● Engine oil consumption is greatly influenced by payload,
engine speed, etc. Depending on how you drive, it can
reach 1.0 lit./1,000 km.
● The engine oil will deteriorate rapidly if the vehicle is
subjected to severe conditions, requiring earlier oil
replacement.
Please refer to the maintenance schedule.
● For information on how to dispose of used engine oil,
refer to page 7.
Recommended engine oil viscosity
Use engine oil conforming to the following classification:
• “VW 50501/50601”
OTE
● Use of additives is not recommended since they may
reduce the effectiveness of additives already included in
the engine oil. It may result in failure of the mechanical
assembly.
To Next Page
Loading...
Need help?
General
