OTE
● If the ignition switch will not turn from the “LOCK” to
the “ACC” position, lightly turn the steering wheel right
and left while turning the ignition switch.
When turning from “ACC” to “LOCK”
1. While pushing the ignition switch, turn to the “LOCK”
position and pull out the key.
2. Install the ignition switch cover.
3. Return the emergency key into the keyless operation key.
OTE
● When not using the emergency key, always install the
ignition switch cover. Otherwise, there is a danger of dirt
or dust getting into the keyhole of the ignition switch and
causing a malfunction.
CAUTION
!
● Do not remove the emergency key from the ignition
switch while driving. The steering wheel will be
locked, causing loss of control.
● If the engine is stopped while driving, the brake ser-
vomechanism will cease to function and braking
efficiency will deteriorate. Also, the power steering
system will not function and it will require greater
manual effort to operate the steering.
● Do not leave the emergency key in the “ON” posi-
tion for a long time when the engine is not running,
doing so will cause the battery to be discharged.
● Do not turn the emergency key to the “START”
position when the engine is running, doing so could
damage the starter motor.
To Next Page
Loading...
Need help?
General
