OTE
● Pressing the LOCK switch (A) once while the Dead Lock
System is set causes the hazard warning lamps to flash
three times, so it is possible to confirm that the Dead Lock
System is set.
● It is Possible to alter the system’s functionality as follows:
• It is possible to disable the operation confirmation func-
tion (flashing of the hazard warning lamps).
• It is possible to change the number of times the opera-
tion confirmation function causes the hazard warning
lamps to flash for confirmation of system operation.
For details, please contact a MITSUBISHI MOTORS
Authorised Service Point.
Cancelling the system
E00305300044
When the UNLOCK switch (B) of the keyless entry system is
pressed to unlock the doors and tailgate, the Dead Lock System
is simultaneously cancelled.
Vehicles with keyless operation system
Vehicles with keyless entry system
To Next Page
Loading...
Need help?
General
