OTE
● Always close the lower gate before closing the upper gate.
If you try to close the gates in the reverse order, they could
strike each other and be damaged.
● Gas struts (D) and wires (E) are installed to support the
tailgate.
To prevent damage or faulty operation.
• Do not hold the gas struts and wires when closing the
tailgate.
• Also, do not push or pull the gas struts and wires.
• Do not attach any plastic material, tape, etc., to the gas
struts and wires.
• Do not tie string, etc., around the gas struts and wires.
• Do not hang any object on the gas struts and wires.
CAUTION
!
● When closing the upper gate, always ensure your or
other person’s fingers cannot be caught by the
upper gate.
● When closing the lower gate, make sure there is no
foreign matter around the striker (C). Otherwise,
the bar could be damaged and it could become
impossible to close the lower gate.
To Next Page
Loading...
Need help?
General
