Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)
Features and controls 5-29
N00561100014
To add a F.A.S.T.-key, you must already have
2 registered F.A.S.T.-keys. You need to regis-
ter the ID code to the vehicle.
Registering the ID code can be done by your
authorized Mitsubishi Motors dealer. Or it
can be done by yourself (except for vehicles
sold in Canada).
For you to register the ID code yourself, fol-
low the “Customer F.A.S.T.-key program-
ming” procedure below.
If you choose to have your authorized
Mitsubishi Motors dealer register the ID
code, take your vehicle and all remaining
F.A.S.T.-keys to your authorized Mitsubishi
Motors dealer.
N00561201227
You can program new F.A.S.T.-keys to the
system if you have two valid (already regis-
tered) F.A.S.T.-keys and a blank (not regis-
tered) F.A.S.T.-key.
For F.A.S.T.-key programming, follow the
procedures below.
1. Open the driver’s door.
2. While carrying the first valid F.A.S.T.-
key, put the operation mode in ON. (Per-
form the following procedure within 30
seconds.)
3. Insert the new F.A.S.T.-key into the key
slot in the illustrated direction.
4. With the first valid F.A.S.T.-key, press the
UNLOCK button for 4 to 10 seconds and
press the LOCK button during this time.
5. Release in sequence the LOCK and
UNLOCK buttons within 10 seconds of
pressing the LOCK button in step 4. (Per-
form the following procedure within 30
seconds.)
6. With the second valid F.A.S.T.-key, press
the UNLOCK button for 4 to 10 seconds
and press the LOCK button during this
time.
Additional F.A.S.T.-keys
You are provided with 2 F.A.S.T.-keys, but
you may register up to 4 F.A.S.T.-keys.
You can obtain blank F.A.S.T.-keys specially
cut for your vehicle from your Mitsubishi
Motors dealer.
Customer F.A.S.T.-key program-
ming (Except for vehicles sold in
Canada)
Keep the driver’s door open until F.A.S.T.-
key programming is finished. Do not open or
close other doors.
BK0239700US.book 29 ページ ２０１６年６月１６日 木曜日 午前１０時５８分
To Next Page
Loading...
