EasyManua.ls Logo

Mitsubishi Outlander 2017 - Turn Signal Lever

Mitsubishi Outlander 2017
521 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Turn signal lever
5-230 Features and controls
5
N00522601529
When changing lanes, or to making a gradual
turn, hold the lever in the “lane change” posi-
tion (1). It will return to the neutral position
when you let go. Use the full position (2)
when making a normal turn. The lever will
return to the neutral position when the turn is
complete. There may be times when the lever
does not return to the neutral position. This
usually happens when the steering wheel is
turned only slightly. You can easily return the
lever by hand.
Also, when you move the lever to (1) slightly
then release it, the turn signal lights and the
indicator light in the instrument cluster will
flash three times.
Keep the knob in the “0” position except
when using the knob to lower the headlight
beam angle.
Always return the knob to the “0” position
when the load is removed and the people
have left the vehicle.
Turn signal lever
NOTE
NOTE
A light in the instrument panel flashes to
show when the front and rear turn signal
lights are working properly.
If this light flashes faster than usual, check
for a burned out turn signal light bulb or mal-
functioning connection in the signal.
If the panel light does not come on when the
lever is moved, check for a blown fuse or a
burned out bulb in the panel.
Have the system inspected by your autho-
rized Mitsubishi Motors dealer or a repair
facility of your choice.
It is possible to modify functions as follows:
Deactivate the turn signal light 3-flash
function for lane changes.
Adjust the time required to operate the
lever for the 3-flash function.
See your authorized Mitsubishi Motors
dealer for details.
For vehicles equipped with the Mitsubishi
Multi-Communication System, adjustments
can be made using screen operations. For
further details, refer to the separate owners
manual.
It is possible to change the tone of a sound-
ing buzzer as the turn signal lights flash.
[Vehicle equipped with the multi information
display - type 1]
Refer to “Changing the turn-signal sound”
on page 5-182.
[Vehicle equipped with the multi information
display - type 2]
See your authorized Mitsubishi Motors
dealer for details.
NOTE
BK0239700US.book 230 ージ 2016年6月16日 木曜日 午前10時58

Table of Contents

Related product manuals