Cargo area cover (if so equipped)
Features and controls 5-281
N00528301179
1. Pull out the spring-loaded cover and insert
it in the mounting grooves (A) on both
sides.
2. Remove the cover from the mounting
grooves, and the cover will be rolled back
into the retracted position.
There are 2 installation holes (B) for the
cargo area cover.
1. Move one of the sliders (C) toward the
inside of the vehicle, and fit the protrud-
ing portion (D) into the installation hole
that is to be used. Move the opposite
slider in the same fashion.
Some beverages may not be stored, depend-
ing on the size and shape of the plastic bot-
tles, etc.
Cargo area cover (if so
equipped)
For vehicles equipped with third row seat,
when the third row seat is in use, always
remove the cargo area cover to avoid seri-
ous injury or death at an accident.
To use
Do not place anything on the cargo area
cover.
To change position
BK0239700US.book 281 ページ ２０１６年６月１６日 木曜日 午前１０時５８分
To Next Page
Loading...
