Mitsubishi Outlander 2017 User Manual

Making a flat seat
4-16 Seat and restraint systems
4
N00409800021
1. Remove the head restraints from the third
row seats. (Refer to “Head restraints” on
page 4-11.)
2. Pull up the strap (A), then fold the seat-
back forward.
3. Stow the removed head restraints in the
luggage floor box with their front faces
facing downward.
1. Pull the strap (A), then raise the seatback
until it locks securely into place.
Push lightly on the seatback to confirm
that it has actually been secured.
2. Install the head restraints.
N00404801166
The entire interior of the vehicle may be used
for sleeping accommodations by removing
the head restraints and fully reclining all the
seats when the vehicle is stopped.
Folding the third row seats
(Seating 7 passengers)
To f old
To ret urn
Making a flat seat
WARNING
 Never drive with passengers or cargo on
the flat seat. This is extremely dangerous
and can cause severe or fatal injury or
death in an accident or if heavy braking is
required.
CAUTION
 Adjust the seats only when the vehicle is
stopped in a safe place.
 Seat should be adjusted only by adults to
avoid accidents.
 When sliding the seats, be careful not to
catch your hand or leg.
 Do not walk around on top of the seats after
they have been laid flat because the footing
is uneven. It is safest to move about on your
hands and knees.
 To ensure the seats are locked securely,
attempt to move them back and forth.
 Do not jump on or drop heavy objects on the
seatbacks.
BK0239700US.book 16 ページ ２０１６年６月１６日 木曜日 午前１０時５８分

Mitsubishi Outlander 2017 Specifications

General

Brand	Mitsubishi
Model	Outlander 2017
Category	Automobile
Language	English