Making a flat seat
Seat and restraint systems 4-17
1. Remove the head restraints from the front
seats and raise the arm rest on the second
row seats.
For vehicles with a cargo area cover,
remove the cover.
(Refer to “Head restraints” on page 4-11,
“Arm rest” on page 4-10 and “Cargo area
cover” on page 5-281.)
2. Slide the second row seats back as far as
possible (vehicles with second row seat
slide function).
(Refer to “To adjust the seat forward or
backward” on page 4-8.)
3. Slide the front seats fully forward, then
recline their seatbacks backward to
achieve a flat surface.
(Refer to “To adjust the seat forward or
backward” on page 4-5 and “To adjust the
seatback” on page 4-6.)
4. Recline the seatbacks of the second row
seats.
(Refer to “To adjust the seatback” on page
4-8.)
5. The flat seat configuration is now com-
plete.
To return the seats to the normal position,
reverse the above procedure.
To raise the seatback of the front seat, firmly
place your hand on the seatback, pull the
seatback lock knob up, and raise the seatback
slowly. (Refer to “To adjust the seatback” on
page 4-6.) Do not let children adjust the seat-
back.
BK0239700US.book 17 ページ ２０１６年６月１６日 木曜日 午前１０時５８分
To Next Page
Loading...
