Mitsubishi Outlander 2017 - Multi Information Display - Type 2

Multi Information display - Type 2
Features and controls 5-183
5
N00557601217
Many of the function settings can be returned
to their factory settings.
1. Press and hold the multi information dis-
play switch (for about 2 seconds or more)
to switch from the setting mode screen to
the menu screen.
Refer to “Changing the function settings”
on page 5-177.
2. Lightly press the multi information dis-
play switch to select “RESET” (return to
the factory settings).
3. Press and hold the multi information dis-
play switch (for about 5 seconds or more),
the buzzer sounds and all of the function
settings are returned to the factory set-
tings.
N00555001291
The multi information display displays the
odometer, trip odometer, service reminder,
fuel remaining, outside temperature, selector
lever position, average fuel consumption,
driving range, etc.
It is also possible to change elements such as
the units used on the multi information dis-
play.
Returning to the factory settings
NOTE
 The factory settings are as follows.
• Average fuel consumption and average
speed reset mode: A (Auto reset)
• Fuel consumption display unit: mpg (US)
or (L/100 km)
• Temperature unit: °F (Fahrenheit) or {°C
(Celsius)}
• Display language: ENGLISH
• Cooperative language setting: A (language
cooperation: enabled)
• Operation sounds: ON (Operation sound
on)
• “REST REMINDER” display: OFF
• Turn signal sound: Turn signal sound 1
• Momentary fuel consumption with the
green bar graph: ON
 The tire ID set cannot be returned to the fac-
tory settings.
Multi Information display -
Type 2
NOTE
1- Frozen road warning  P.5-186
2- Information display  P.5-184
3- Selector lever position display
 P.5-70, 5-77
4- Service reminder  P.5-187
5- Fuel remaining display  P.5-187
NOTE
 When the ignition switch is in the “OFF”
position, the selector lever position display,
fuel remaining display and frozen road warn-
ing are not displayed.
BK0239700US.book 183 ページ ２０１６年６月１６日 木曜日 午前１０時５８分