Mitsubishi Outlander 2017 - Clock (if so Equipped)

Clock (if so equipped)
Comfort controls 7-49
7
Here is a list of symptoms, causes and responses if you think something is not working properly.
N00755001150
The time is displayed when the ignition
switch or the operation mode is in ON or
ACC.
If You Think Something Is Not Working Properly...
Symptoms Cause Response
There is no sound or quiet
sound.
The volume is turned to its minimum. Adjust the volume.
 “Adjust Volume” (P.7-24)
The balance or fader is turned to one side. Adjust the balance or fader.
 “Adjust Audio Quality and Volume Balance” (P.7-44)
The disc cannot be
inserted.
A disc is already in the product. Eject the disc.
 “Insert/Eject Discs” (P.7-24)
There is no disc in the product, but the prod-
uct says it is loading.
Press the eject button once.
 “Insert/Eject Discs” (P.7-24)
The disc cannot be played. The disc is inserted upside down. Insert with the label side up.
The disc has condensation on it. Wait a while before inserting.
The disc is dirty. Clean the read surface of the disc.
The sound skips in the
same place.
The disc is damaged or dirty. Check the disc.
There is no sound, even if
the disc is inserted.
Damage to or dirt on the disc means that its
data cannot be read.
Check the disc. Additionally, if using CD-R/RW discs, their charac-
teristics may render them unable to be played.
Clock (if so equipped)
NOTE
 Reset the time after the battery terminals are
disconnected and reconnected.
BK0239700US.book 49 ページ ２０１６年６月１６日 木曜日 午前１０時５８分