Ignition switch
5-64 Features and controls
The engine is off and the steering wheel is
locked. The key can be inserted and removed
only when the switch is in this position.
The engine is off. The key can be inserted and
removed only when the switch is in this posi-
tion.
Allows operation of electrical accessories
with the engine off.
All accessories can be used.
Engages the starter. Release the key when the
engine starts.It will automatically return to
the “ON” position.
N00539601071
After about 30 minutes has elapsed with the
ignition switch in the “ACC” position, the
function automatically cuts out the power for
the audio system and other electric devices
that can be operated with that position.
When the ignition switch is turned from the
“ACC” position, the power is supplied again
to those devices.
N00550901211
When removing the key, first set the selector
lever to the “P” (PARK) position, and then
turn the key to the “OFF” position and
remove it.
LOCK (Type 2)
OFF (Type 1)
ACC
ON
START
Your vehicle is equipped with an electronic
immobilizer. To start the engine, the ID code
which the transponder inside the key sends
must match the one registered to the immobi-
lizer computer. (Refer to “Electronic immo-
bilizer” on page 5-4.)
ACC power auto-cutout func-
tion
It is possible to modify functions as follows:
• The time until the power cuts out can be
changed to about 60 minutes.
• The ACC power auto-cutout function can
be deactivated.
For details, we recommend you to consult an
authorized Mitsubishi Motors dealer.
On vehicles equipped with Mitsubishi Multi-
Communication System, screen operations
can be used to make the adjustment.
Refer to the separate Mitsubishi Multi-Com-
munications System manual for details.
To remove the key
Type 1
BK0239700US.book 64 ページ ２０１６年６月１６日 木曜日 午前１０時５８分
To Next Page
Loading...
Need help?
General
