EasyManua.ls Logo

Mitsubishi Outlander 2017 - Page 152

Mitsubishi Outlander 2017
521 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Automatic transaxle (if so equipped)
Features and controls 5-71
5
When the warning display or the warn-
ing display appears on the information screen
in the multi-information display while you
are driving, there could be a malfunction in
the automatic transaxle.
N00514201425
This position locks the transaxle to prevent
the vehicle from moving. The engine can be
started in the “P” (PARK) position.
Move the lever to this position only after the
vehicle has come to a complete stop.
At this position, the transaxle is disengaged.
It is the same as the neutral position on a
manual transaxle and should be used when
the vehicle is not moving for an extended
length of time during driving, such as in a
traffic jam.
CAUTION
If a malfunction occurs in the automatic
transaxle while driving, the warning dis-
play or the warning display will appear
on the information screen in the multi-infor-
mation display.
In this case, immediately park your vehicle
in a safe place and follow these procedures:
When warning display is showing
The automatic transaxle fluid is overheating.
Stop your vehicle in a safe place, put the
selector lever in the “P” position, and open
the engine hood with the engine running to
allow the engine to cool down. After a while,
confirm that the warning display is no
longer showing. It is safe to continue driving
if the display is no longer showing. If the
warning display remains or flashes fre-
quently, have your vehicle inspected by an
authorized Mitsubishi Motors dealer or a
repair facility of your choice.
When warning display is showing
It may be that there is something unusual
happening in the automatic transaxle, caus-
ing a safety device to activate. Have your
vehicle inspected by an authorized Mitsubi-
shi Motors dealer or a repair facility of your
choice immediately.
Selector lever positions
“P” PARK
“R” REVERSE
CAUTION
Never shift into the “P” (PARK) or “R”
(REVERSE) position while the vehicle is in
motion. If the lever is shifted into the “P”
(PARK) or “R” (REVERSE) position while
the vehicle is in motion, the transaxle may be
damaged.
“N” NEUTRAL
BK0239700US.book 71 ペー 2016年6月16日 木曜日 午前10時58分

Table of Contents

Related product manuals