Electronically controlled 4WD system (if so equipped)
5-84 Features and controls
N00549401030
Normally the indicator illuminates when the
operation mode put in ON, and then the drive
mode is displayed a few seconds after the
engine is started.
The status of each drive mode display is as
follows.
On vehicles with color liquid crystal display
meter, the drive mode is displayed as an inter-
rupt display on the information screen in the
multi information display when the drive
mode is switched.
After a few seconds, the information screen
returns from the drive mode display to the
previous screen.
The drive mode can be switched while driv-
ing or stopped.
Drive mode indicator
Drive Mode
Drive mode indicator
color liquid
crystal dis-
play meter
mono-color
liquid crys-
tal display
meter
4WD ECO 4WD ECO 4WD-E
4WD AUTO 4WD AUTO —
4WD LOCK 4WD LOCK LOCK
Drive mode Display
4WD ECO
4WD AUTO
4WD LOCK
If the selected drive mode indicator begins
blinking, the drive mode will automatically
switch to protect the drive-system compo-
nents. A warning will also be displayed in
the information screen in the multi informa-
tion display.
Warning display (color liquid crystal dis-
play)
Reduce speed and, if the indicator stops
blinking, you may resume normal driving.
For vehicles equipped with mono-color liq-
uid crystal display meter, drive mode indica-
tor (“4WD-E”, “LOCK”) is blinking
alternately
BK0239700US.book 84 ページ ２０１６年６月１６日 木曜日 午前１０時５８分
To Next Page
Loading...
