Adaptive Cruise Control System (ACC) (if so equipped)
5-110 Features and controls
N00581300025
The speed of your vehicle will be maintained
at the speed you have set. The speed can be
set between approximately 25 mph (40 km/h)
and 110 mph (180 km/h).
N00581400039
The ACC will maintain the distance to the
front vehicle and will apply the brakes auto-
matically when the system judges braking is
necessary. The distance can be selected from
three levels.
When the front vehicle stops, the ACC will
automatically apply the brakes to stop your
vehicle.
A few seconds after your vehicle has stopped,
the ACC will release the brakes and your
vehicle will start to move or creep slowly.
You must apply the brakes to keep your vehi-
cle stationary.
When the ACC no longer detects a vehicle in
front, the buzzer will sound, the vehicle sym-
bol in the display will disappear and your
vehicle will slowly accelerate to the set
speed.
• When an abnormality in the ACC system
has been detected.
When ACC detects no vehicle
in front within the set distance
If the vehicle speed exceeds the set speed on
a down slope, the system will automatically
apply the brake to maintain the vehicle set
speed.
When ACC detects a vehicle in
front within the set distance
If the brake pedal is not depressed within 2
seconds after your vehicle has been stopped
by the ACC, a warning buzzer will sound,
the above warning will be shown in the multi
information display to alert the driver, and
the ACC control will be canceled.
When depressing the brake pedal while the
automatic brake is applied, the brake pedal
will feel firm. This is normal. Depress the
brake pedal harder to apply greater braking
force.
During the automatic braking, operation
sounds may be heard. This is normal.
Never leave the vehicle while it is being
stopped by the ACC.
BK0239700US.book 110 ページ ２０１６年６月１６日 木曜日 午前１０時５８分
To Next Page
Loading...
