Adaptive Cruise Control System (ACC) (if so equipped)
5-114 Features and controls
By depressing the brake pedal while the ACC
is activated, the ACC control is canceled and
your vehicle speed will decrease.
At the point where the vehicle speed reaches
your desired speed, push down and release
the “SET -” switch; the new speed is then set
in the system.
N00582800027
Simply depress the accelerator pedal to tem-
porarily accelerate the vehicle. Releasing the
pedal automatically slows down the vehicle
to the set speed and ACC restarts its control.
N00581700061
There are two ways to cancel the ACC con-
trol.
By pressing the “CANCEL” switch.
By depressing the brake pedal.
The set speed can be changed even while
your vehicle is following a vehicle in front
using the ACC. In this case, however,
although the set speed itself is decreased,
your vehicle will not decelerate.
When the switch is held, a buzzer will sound
every time the set speed changes
By using the brake pedal:
The ACC control will not resume after
releasing the brake pedal.
To temporarily accelerate the
vehicle
The ACC braking control and approach
alarm functions will not work while the
accelerator pedal is depressed.
The set speed indication on the display turns
to “---” when the accelerator pedal is
depressed. This indication remains as long as
the pedal is in a depressed position.
In certain conditions, the braking control and
alarming functions of ACC may not work for
a short while after releasing the accelerator
pedal.
To cancel ACC control
BK0239700US.book 114 ページ ２０１６年６月１６日 木曜日 午前１０時５８分
To Next Page
Loading...
