Blind Spot Warning (BSW) (with Lane Change Assist) (if so equipped)
Features and controls 5-135
N00592700032
When the warning display appears, the BSW
does not operate normally because there are
some malfunctions in the system or the sen-
sor. Have the vehicle inspected at an autho-
rized Mitsubishi Motors dealer as soon as
possible.
N00592800033
When the warning display appears, the sensor
is temporarily not available for some reason
such as the environmental condition or
increase of the sensor temperature. When the
warning display does not disappear after
waiting for a while, contact an authorized
Mitsubishi Motors dealer.
N00592900034
When the warning display appears, the radar
sensor cannot detect a vehicle traveling side
by side or an approaching vehicle, because
foreign objects, such as dirt, snow or ice,
adhere to the bumper surface around the sen-
sor.
Remove a dirt, freezing or foreign material on
the bumper surface around the sensor.
When the warning display does not disappear
after having cleaned the bumper surface
around the sensor, contact an authorized Mit-
subishi Motors dealer.
N00593900028
For vehicles sold in U.S.A
FCC ID:OAYSRR3A
For vehicles sold in Canada
Applicable law: Canada 310
Frequency bands: 24.05 - 24.25GHz
Output power: less than 20 milliwatts
When there is a malfunction in the
system or the sensor
When the warning display appears, the BSW
will be deactivated.
When the sensor is temporarily
not available
When there is a foreign objects on
the sensor
General information
BK0239700US.book 135 ページ ２０１６年６月１６日 木曜日 午前１０時５８分
To Next Page
Loading...
