Mitsubishi Outlander 2017 - Page 303

Combination headlights and dimmer switch
5-222 Features and controls
5
[When the engine is not running, or when the
engine is running but the parking brake is not
released]
The engine starts when the lights are off.
N00532601580
 If the following operation is performed
with the combination headlights and dim-
mer switch in the “ ” or “ ” position,
the lights automatically turn off.
[Except for vehicles equipped with the
F.A.S.T.-key]
The ignition switch is turned to the “OFF”
or “ACC” position or the key is removed
from the ignition switch and the driver’s
door is opened.
[For vehicles equipped with the F.A.S.T.-
key]
The operation mode is changed to OFF or
ACC and the driver’s door is opened.
 If the following operation is performed
with the combination headlights and dim-
mer switch in the “ ” or “ ” position,
the lights automatically turn off after
about 3 minutes.
[Except for vehicles equipped with the
F.A.S.T.-key]
The ignition switch is turned to the “OFF”
or “ACC” position or the key is removed
from the ignition switch and the driver’s
door is not opened.
The daytime running lights illumi-
nated
Tail, front and rear side-marker
lights, license plate, instrument
panel lights and downlight on
Headlights and other lights on
NOTE
 Once the daytime running light come on,
they do not go out until the ignition switch is
turned to the “OFF” or “ACC” position or
the operation mode is changed to OFF or
ACC.
OFF All lights off
AUTO
Headlights and other lights turn on
and off automatically in accor-
dance with outside light level.
Parking, tail, front and rear side-
marker lights, license plate, instru-
ment panel lights and downlight on
Headlights and other lights on
NOTE
 The sensitivity of the automatic on/off con-
trol can be adjusted.
For further information, please contact your
authorized Mitsubishi Motors dealer or a
repair facility of your choice.
On vehicles equipped with Mitsubishi Multi-
Communication System, screen operations
can be used to make the adjustment.
Refer to the separate owner’s manual for
details.
 Do not cover the sensor (A) for the automatic
on/off control by affixing a sticker or label to
the windshield.
 If the lights do not turn on or off with the
switch in the “AUTO” position, manually
operate the switch. Have the system checked
by an authorized Mitsubishi Motors dealer or
a repair facility of your choice.
Light auto-cutout function
(headlights and other lights)
BK0239700US.book 222 ページ ２０１６年６月１６日 木曜日 午前１０時５８分