Mitsubishi Outlander 2017 User Manual

USB input terminal
5-264 Features and controls
5
4. Connect the USB connector cable (C) to
the USB input terminal (D).
5. To remove the USB connector cable, turn
the ignition switch to the “LOCK” posi-
tion or put the operation mode in OFF
first and perform the installation steps in
reverse.
N00566901199
1. Park your vehicle in a safe place and turn
the ignition switch to the “LOCK” posi-
tion or put the operation mode in OFF.
2. Open the USB input terminal cover (A) in
the floor console box.
3. Connect the connector cable to the iPod.
4. Connect the connector cable (B) to
theUSB input terminal (C).
5. To remove the connector cable, turn the
ignition switch to the “LOCK” position or
put the operation mode in OFF first and
perform the installation steps in reverse.
CAUTION
 Keep the lid of the floor console box closed
while driving the vehicle. A lid or the con-
tents of the floor console box could other-
wise cause injuries.
NOTE
 Do not connect the USB memory device to
the USB input terminal directly.
The USB memory device may be damaged.
 When closing the floor console box, be care-
ful not to trap the USB connector cable.
How to connect an iPod
NOTE
 Use a genuine connector cable from Apple
Inc.
Type 1
Type 2
CAUTION
 Keep the lid of the floor console box closed
while driving the vehicle. A lid or the con-
tents of the floor console box could other-
wise cause injuries.
NOTE
 When closing the floor console box, be care-
ful not to trap the connector cable.
BK0239700US.book 264 ページ ２０１６年６月１６日 木曜日 午前１０時５８分

Mitsubishi Outlander 2017 Specifications

General

Brand	Mitsubishi
Model	Outlander 2017
Category	Automobile
Language	English