How to change a tire
For emergencies 8-13
N00849401235
Wrap the tip of the bar with a cloth, insert it
into the notch provided in the wheel cover,
and pry the cover away from the wheel.
Using the same procedure at the other wheel
cover notches, work the wheel cover away
from the wheel to remove it completely.
1. Align the tire air valve (C) and the wheel
cover notch (D).
2. Push the bottom (F) of the wheel cover
into the wheel.
3. Gently push in both sides (G) of the wheel
cover and hold them in place with both
knees.
4. Gently tap the top (H) of the wheel cover
around its outer circumference to push it
in.
Wheel cover (if so equipped)
To remove
The wheel cover is made of plastic. Be care-
ful when prying it off.
Trying to remove the wheel cover with only
your bare hands can seriously injure your
fingers.
To install
Before installing the wheel cover to the
wheel, make sure that the tabs (A) on the
back of the wheel cover correctly engage the
ring (B) to prevent the wheel cover from
coming off. Do not install a wheel cover that
has broken tabs.
The back of the cover has a symbol (E) that
shows the position of the notch.
BK0239700US.book 13 ページ ２０１６年６月１６日 木曜日 午前１０時５８分
To Next Page
Loading...
Need help?
General
