Keyless entry system (if so equipped)
5-12 Features and controls
N00544101205
1. Before replacing the battery, remove static
electricity from your body by touching a
metal grounded object.
2. Remove the screw (A) from the remote
control transmitter.
3. With the Mitsubishi mark facing you,
insert the cloth-cov-ered tip of a flat blade
screwdriver into the notch in the remote
control transmitter case and use it to open
the case.
4. Remove the old battery.
5. Install a new battery with the +side (B)
up.
6. Close the remote control transmitter case
firmly.
7. Attach the screw (A) removed in step 2.
Changes or modifications not expressly
approved by the manufacturer for compli-
ance could void the user’s authority to oper-
ate the equipment.
Procedure for replacing the
remote control transmitter bat-
tery
Be sure to perform the procedure with the
Mitsubishi mark facing you. If the Mitsubi-
shi mark is not facing you when you open the
remote control transmitter case, the buttons
may come out.
The Federal Communications Commission
(FCC) ID number, the Industry Canada (IC)
number and the model number (radio certifi-
cation) are indicated in the illustrated posi-
tion.
+ side
- side
Coin type bat-
tery CR1620
BK0239700US.book 12 ページ ２０１６年６月１６日 木曜日 午前１０時５８分
To Next Page
Loading...
