Mitsubishi Q01CPU User Manual

12
TROUBLESHOOTING
12.3 Error Code List
12.3.3 Error code list (1000 to 1999)
12 - 81
9
EMC AND LOW VOLTAGE DIRECTIVES
10
LOADING AND INSTALLATION
11
MAINTENANCE AND INSPECTION
12
TROUBLESHOOTING APPENDICES INDEX
1415
Fault of the main or extension base unit
was detected.
Reset the CPU module and RUN it
again. If the same error is displayed
again, the intelligent function module,
CPU module or base unit is faulty.
(Contact your local Mitsubishi
representative.)
Q00J/Q00/Q01
Qn(H)
*4
QnPH
QnPRH
QnU
Rem
Qn(H)
*8
QnPH
*8
1416
System bus fault was detected at
power-on or reset.
Qn(H)
*4
QnPH
QnU
In a multiple CPU system, a bus fault
was detected at power-on or reset.
Reset the CPU module and RUN it
again. If the same error is displayed
again, the intelligent function module,
CPU module or base unit is faulty.
(Contact your local Mitsubishi
representative.)
Q00/Q01
*4
QnU
1417
A reset signal error was detected on the
system bus.
QnPRH
1418
In the redundant system, at power-on/
reset or switching system, the control
system cannot access the extension
base unit since it failed to acquire the
access right.
Reset the CPU module and RUN it
again. If the same error is displayed
again, the CPU module, the Q6 WRB,
or hardware of extension cable is faulty.
(Contact your local Mitsubishi
representative, explaining a detailed
description of the problem.)
QnPRH
*9
1421
Hardware fault at the system
management module AS92R.
This suggests a system management
module AS92R hardware fault.
(Contact your local Mitsubishi
representative.)
Q4AR
Error
Code
(SD0)
Error Contents and Cause Corrective Action
Corresponding
CPU
*4 Function version is B or later.
*5 Function version is A.
*6 The module whose first 5 digits of serial No. is 04101 or later.
*7 The module whose first 5 digits of serial No. is 07032 or later.
*8 The module whose first 5 digits of serial No. is 08032 or later.
*9 The module whose first 5 digits of serial No. is 09012 or later.
*10 The Universal model QCPU except the Q02UCPU.
*11 The Q13UDHCPU and Q26UDHCPU
*12 This applies to the QnUDE(H)CPU.
*13 The module whose first 5 digits of serial No. is 10042 or later.

Mitsubishi Q01CPU Specifications

General

Brand	Mitsubishi
Model	Q01CPU
Category	Controller
Language	English