Mitsubishi Q01CPU User Manual

12 - 130
12.3 Error Code List
12.3.5 Error code list (3000 to 3999)
12
TROUBLESHOOTING
12.3.5 Error code list (3000 to 3999)
The following shows the error messages from the error code 3000 to 3999, the contents
and causes of the errors, and the corrective actions for the errors.
Table12.7 Error code
Error
Code
(SD0)
Error
Message
Common
Information
(SD5 to 15)
Individual
Information
(SD16 to 26)
LED Status CPU
Operation
Status
Diagnostic
Timing
RUN ERROR
3000
PARAMETER
ERROR
File name/
Drive name
Parameter
number
Off Flicker Stop
At power ON/
At reset/
STOP RUN/
At writing to
programmable
controller
3001
*1 The function version is B or later.
*2 Parameter No. is the value gained by dividing the head I/O number of parameter in the intelligent function module set by GX Configurator by 10
H.
*3 The diagnostic timing of CPU modules except for Universal model QCPU can be performed only when switching the CPU modules to run.

Mitsubishi Q01CPU Specifications

General

Brand	Mitsubishi
Model	Q01CPU
Category	Controller
Language	English