2 - 31
2.1 System Configuration
2.1.3 Configuration of peripheral devices
2
SYSTEM CONFIGURATION
2.1.3 Configuration of peripheral devices
This section describes the configurations of the peripheral devices usable in the system
where the Basic model QCPU, the High Performance model QCPU or the Process CPU is
used.
(1) When the Basic model QCPU is used
* : For the GX Developer and GX Configurator versions compatible with the Basic model QCPU, refer
to Section 2.1.4.
Diagram 2.24 Configuration of peripheral devices
Basic model QCPU
RS-232 cable
Personal Computer (GX Developer, GX Configurator)
To Next Page
Loading...