2
SYSTEM CONFIGURATION
2.1 System Configuration
2.1.3 Configuration of peripheral devices
2 - 32
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
GENERAL
SPECIFICATIONS
4
HARDWARE
SPECIFICATIONS OF
THE CPU MODULE
5
POWER SUPPLY
MODULE
6
BASE UNIT AND
EXTENSION CABLE
7
MEMORY CARD AND
BATTERY
8
CPU MODULE START-
UP PROCEDURES
(2) When the High Performance model QCPU is used
* 1: Format the ATA card by GX Developer only. ( Section 7.1.4.)
* 2: Not usable for the Q02CPU.
* 3: For the writing to the memory card and the USB cable details, refer to the following:
GX Developer Operating Manual
* 4: For the GX Developer and GX Configurator versions compatible with the High Performance
model QCPU, refer to Section 2.1.4.
Diagram 2.25 Configuration of peripheral devices
1
Memory card
1
Memory card
PC card
adapter
High Performance model QCPU
4
Personal Computer
(GX Developer, GX Configurator)
RS-232 cable
2, 3
USB cable
(Connector type B)
To Next Page
Loading...