Mitsubishi Q01CPU User Manual

12
TROUBLESHOOTING
12.3 Error Code List
12.3.4 Error code list (2000 to 2999)
12 - 91
9
EMC AND LOW VOLTAGE DIRECTIVES
10
LOADING AND INSTALLATION
11
MAINTENANCE AND INSPECTION
12
TROUBLESHOOTING APPENDICES INDEX
2010
• More than applicable number of
extension base units have been used.
• When a GOT was bus-connected, the
CPU module was reset while the
power of the GOT was OFF.
• Use the allowable number of
extension base units or less.
• Power on the Progammable
Controller and GOT again.
Q00J/Q00/
Q01
*3
QnPRH
Q02U
2011
The QA1S6 B, QA6 B or
QA6ADP+A5 B/A6 B was used as
the base unit.
Do not use the QA1S6 B, QA6 B or
QA6ADP+A5 B/A6 B as the base
unit.
Q00J/Q00/
Q01
*3
QnPRH
QnU
Error
Code
(SD0)
Error Contents and Cause Corrective Action
Corresponding
CPU
*3 The function version is B or later.
*4 The function version is A.
*5 The module whose first 5 digits of serial No. is 04101 or later.
*6 The module whose first 5 digits of serial No. is 09012 or later.
*7 The Universal model QCPU except the Q02UCPU.
*8 This applies to the QnUDE(H)CPU.
*9 The module whose first 5 digits of serial No. is 10042 or later.

Mitsubishi Q01CPU Specifications

General

Brand	Mitsubishi
Model	Q01CPU
Category	Controller
Language	English