Mitsubishi Q01CPU - Page 437

12
TROUBLESHOOTING
12.3 Error Code List
12.3.4 Error code list (2000 to 2999)
12 - 113
9
EMC AND LOW VOLTAGE DIRECTIVES
10
LOADING AND INSTALLATION
11
MAINTENANCE AND INSPECTION
12
TROUBLESHOOTING APPENDICES INDEX
2124
• A module is mounted on the 65th slot
or later slot.
• A module is mounted on the slot
whose number is greater than the
number of slots specified at [Slots] in
[Standard setting] of the base setting.
• A module is mounted on the slot
whose number of I/O points exceeds
4096 points.
• A module is mounted on the slot
whose number of I/O points strides
4096 points.
• Remove the module mounted on the
65th slot or later slot.
• Remove the module mounted on the
slot whose number is greater than the
number of slots specified at [Slots] in
[Standard setting] of the base setting.
• Remove the module mounted on the
slot whose number of I/O points
exceeds 4096 points.
• Replace the module with the one
whose number of occupied points
does not exceed 4096 points.
Qn(H)
QnPH
QnPRH
QnU
*7
Rem
• A module is mounted on the 37th slot
or later slot.
• A module is mounted on the slot
whose number is greater than the
number of slots specified at [Slots] in
[Standard setting] of the base setting.
• A module is mounted on the slot
whose number of I/O points exceeds
2048 points.
• A module is mounted on the slot
whose number of I/O points strides
2048 points.
• Remove the module mounted on the
37th slot or later slot.
• Remove the module mounted on the
slot whose number is greater than the
number of slots specified at [Slots] in
[Standard setting] of the base setting.
• Remove the module mounted on the
slot whose number of I/O points
exceeds 2048 points.
• Replace the module with the one
whose number of occupied points
does not exceed 2048 points.
Q02U
• A module is mounted on the 25th slot
or later slot. (The 17th slot or later slot
for the Q00J.)
• A module is mounted on the slot
whose number is greater than the
number of slots specified at [Slots] in
[Standard setting] of the base setting.
• A module is mounted on the slot
whose number of I/O points exceeds
1024 points. (256 points for the
Q00J.)
• A module is mounted on the slot
whose number of I/O points strides
1024 points. (256 points for the
Q00J.)
• Remove the module mounted on the
25th slot or later slot. (The 17th slot or
later slot for the Q00J.)
• Remove the module mounted on the
slot whose number is greater than the
number of slots specified at [Slots] in
[Standard setting] of the base setting.
• Remove the module mounted on the
slot whose number of I/O points
exceeds 1024 points. (256 points for
the Q00J.)
• Replace the module with the one
whose number of occupied points
does not exceed 1024 points. (256
points for the Q00J.)
Q00J/Q00/Q01
5 or more extension base units were
added. (3 bases for Q00J)
Remove 5 or more extension base
units. (3 bases for Q00J)
Q00J/Q00/
Q01
*4
Error
Code
(SD0)
Error Contents and Cause Corrective Action
Corresponding
CPU
*3 The function version is B or later.
*4 The function version is A.
*5 The module whose first 5 digits of serial No. is 04101 or later.
*6 The module whose first 5 digits of serial No. is 09012 or later.
*7 The Universal model QCPU except the Q02UCPU.
*8 This applies to the QnUDE(H)CPU.
*9 The module whose first 5 digits of serial No. is 10042 or later.