Mitsubishi Q01CPU - Page 458

12 - 134
12.3 Error Code List
12.3.5 Error code list (3000 to 3999)
12
TROUBLESHOOTING
3005
PARAMETER
ERROR
File name/
Drive name
Parameter
number
Off Flicker Stop
At power-ON/
At reset/
STOP RUN
3006
PARAMETER
ERROR
File name/
Drive name
Parameter
number
Off Flicker Stop
At power-On/
At reset/
STOP RUN/
At writing to
programmable
controller
3007
3009
Error
Code
(SD0)
Error
Message
Common
Information
(SD5 to 15)
Individual
Information
(SD16 to 26)
LED Status CPU
Operation
Status
Diagnostic
Timing
RUN ERROR
*1 The function version is B or later.
*2 Parameter No. is the value gained by dividing the head I/O number of parameter in the intelligent function module set by GX Configurator by 10
H.
*3 The diagnostic timing of CPU modules except for Universal model QCPU can be performed only when switching the CPU modules to run.