Mitsubishi Q01CPU User Manual

12
TROUBLESHOOTING
12.3 Error Code List
12.3.6 Error code list (4000 to 4999)
12 - 177
9
EMC AND LOW VOLTAGE DIRECTIVES
10
LOADING AND INSTALLATION
11
MAINTENANCE AND INSPECTION
12
TROUBLESHOOTING APPENDICES INDEX
*3 The module whose first 5 digits of serial No. is 04012 or later.
*4 The module whose first 5 digits of serial No. is 07012 or later.
*5 The module whose first 5 digits of serial No. is 07032 or later.
*6 The module whose first 5 digits of serial No. is 09012 or later.
*7 The Universal model QCPU except the Q02UCPU.
*8 This applies to the QnUDE(H)CPU.
4351
• The multiple CPU high-speed
transmission dedicated instruction by
the program cannot be executed to
the specified target CPU module.
• The instruction name is wrong.
• The instruction unsupported by the
target CPU module is specified.
Read the common information of the
error using the peripheral device, check
error step corresponding to its
numerical value (program error
location), and correct the problem.
QnU
*7
4352
The number of devices for the multiple
CPU high-speed transmission
dedicated instruction by the program is
wrong.
4353
The device which cannot be used for
the multiple CPU high-speed
transmission dedicated instruction by
the program is specified.
QnU
4354
The character string which cannot be
handled by the multiple CPU high-
speed transmission dedicated
instruction is specified.
QnU
*7
4355
The number of read/write data (number
of request/receive data) for the multiple
CPU high-speed transmission
dedicated instruction by the program is
not valid.
Error
Code
(SD0)
Error Contents and Cause Corrective Action
Corresponding
CPU

Mitsubishi Q01CPU Specifications

General

Brand	Mitsubishi
Model	Q01CPU
Category	Controller
Language	English