A
endix A: Product S
ecifications
74
Signal Inputs
MFC
Scaling (GCF) Control
External Set Point
(bypasses on-board set point controls)
External ON/OFF
0 to +5 VDC (5.5 V maximum)
0.1 to 4.0; allows display in actual
engineering units for a specific gas
0 to 5 VDC
TTL Compatible
Signal Outputs
MFC Output(s)
Unscaled (Uncorrected) Transducer
(MFC) Output
Scaled (Corrected) Transducer (MFC)
Output
Minimum load impedance; 10K ohm/channel
0 to +5 VDC
0 to +1 VDC Nominal (scaled with a rear
panel scaling control); ±1 VDC corresponds
to a 1000 count reading on the DPM; 0 to 2
VDC maximum
Weight 4 lbs. 2 oz (2.1 kg)
Zero Correction ± 3% of Full Scale
Due to continuing research and development activities, these product specifications are subject to change without notice.
To Next Page
Loading...
