Appendix A: Product Specifications
73
Appendix A: Product Specifications
CE Compliance
Electromagnetic Compatibility
1
Low-Voltage Requirements
Installation Category
Pollution Degree
Product Safety and Liability
EMC Directive 89/336/EEC
Low-Voltage Directive 73/23/EEC
II, according to EN 61010-1
2, according to IEC 664
Product Safety Directive 92/59/EEC
Display Accuracy ±0.1% ±1 digit
Flow Display 3½ Digit Display (+1.999 maximum)
0.56” Red LED display
Fuse Ratings
115 VAC
230 VAC
630 mA (T) / 250 V
315 mA (T) / 250 V
Operating Temperature 15° to 40° C (59° to 104° F)
Power Consumption 70 VA (maximum)
Power Requirement
115 VAC Setting
230 VAC Setting
100 to 120 VAC nominal, 50/60 Hz
200 to 240 VAC nominal, 50/60 Hz
Power Supply Output Capacity ±15 VDC @ 500 milliamps
Maximum ripple < 10 mV P-P
Set Point Adjust
Flow Control
Ratio Control
0.1 to 100% of Full Scale
0.1 to 100% of Input Level
1
An overall metal braided shielded cable, properly grounded at both ends, is required during use.
To Next Page
Loading...
