MKS Instruments UK Ltd
Microvision2 Hardware Manual – SP101015.102 August 2010
25
You can check the status of the Microvision2
by using the RGA Device Manager application on the supplied
MKS Utilities CD.
Double-click the RGA Device Manager icon to start the application. After a few moments the following
dialog appears displaying a list of all discovered MKS RGA’s.
You can see that there is only
one RGA displayed in the
example, yours may contain
many entries.
Ensure you choose the
correct instrument from the
list.
The status, current IP address and type of IP addressing can be checked in this dialog. Once “Ready” is
displayed you can close RGA Device Manager and begin using the RGA.
To Next Page
Loading...
Need help?
General
