82/112
D15 Camera Manual: Operating the Camera
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
been specified in MxManagementCenter will be displayed with the icon (Camera is
password-protected).
Reconfiguring Network Addresses of Cameras
Using Bonjour*, MxManagementCenter finds not only cameras on the same network
as your computer, but also MOBOTIX cameras located in other subnets (status:
). In
such a case, you would not be able to establish any connection to cameras in a dierent
network or subnet.
This is the case, for example, if you are integrating cameras into a network without DHCP
server (i.e., with fixed IP addresses) and the IP address range is dierent from the 10.x.x.x
range supported by the cameras in addition to DHCP.
MxManagementCenter can automatically configure such a camera so that it is ”integrated”
into your existing network. To do so, you have to select the respective camera and then
click on the
button at the bottom of the program window.
The Network Setting dialogue opens.
If you have assigned a fixed IP address to your computer, you will certainly prefer to assign
fixed IP addresses to the cameras. To do so, enter the IP address and the subnet mask.
The IP address is incremented automatically for each selected camera.
When you click on Apply, the selected cameras are automatically reconfigured and they
are located in the same subnet as the computer.
To Next Page
Loading...
