Mobotix D24M - First Images and Network Parameter Configuration in Mxcontrolcenter




www.mobotix.com • sales@mobotix.com
 
Installation
If you have a MxControlCenter installation CD, insert it into the CD/DVD drive of your computer.
If you do not have the installation CD or just want to install an update, you can download
the latest Windows installer from the MOBOTIX website as an
MSI
file and install it manu-
ally. The latest versions are available at
www.mobotix.com
in the

Downloads> MxControlCenter.
If you insert the installation CD, the installation process will start automatically and you
will be guided through the necessary steps. If you have downloaded the latest Windows
installer, double-click the
MSI
file to initiate the installation process.
The Installer copies the selected files to the computer (older versions will be removed
automatically) and then creates the designated shortcuts during the installation process
(Desktop, Start Menu, etc.).
Caution
MxControlCenter will automatically attempt to find all MOBOTIX cameras in the
physically connected network (i.e. even a MOBOTIX camera with a factory IP address
of
10.x.x.x
). Make sure that the
 
on your computer are low
enough so that MxControlCenter is not blocked. If MOBOTIX cameras are found,
MxControlCenter can automatically

them so that they are available in
 them so that they are available in 
the current subnet of the computer. If you do not have permission to modify these
settings on your computer, contact your system administrator for assistance.
Installation
Download
MxControlCenter
for free from www.
mobotix.com