www.mobotix.com • sales@mobotix.com
2
Although the D24M is primarily designed for installation on walls and ceilings, it can also
be mounted to a pole or the corner of a building, for example, using the appropriate
MOBOTIX accessories. The dierent installation options are described in sections 2.4 and
below, while the drilling templates can be found at the end of the manual.
Before installing the MOBOTIX D24M, the following questions should be answered:
1.
Mounting to a ceiling or wall, see Section 2.1.1
2.
On-wall mounting, in-ceiling mounting, vandalism protection, wall mounting, pole
mounting, see Section 2.1.2
3.
MX-NPA-PoE or other PoE components (IEEE 802.3af), see Section 2.1.3
4.
Sockets, see Section 2.1.4
5.
Wiring, see Sections 2.1.5 and 2.13
The following sections contain a brief answer to each of these questions, as well as refer-
ences to the relevant sections in this manual. For more information on the MOBOTIX D24M
and available accessories, please see: www.mobotix.com.
To Next Page
Loading...
