www.mobotix.com • sales@mobotix.com
Please first check that all the components supplied with the camera are present in the
original packaging (see Section 2.2 or 2.3).
• Any additional materials for fastening the camera to a ceiling/wall, if necessary – 4
are included in the original packaging.
•
• for screw anchor holes needed for ceiling/wall mounting
• MOBOTIX (at the end of this manual)
• to cut out the template
• to mark the drill holes
•
Materials and any tools needed to connect the pre-installed MOBOTIX network cable
in the camera with the on-site network cable.
To Next Page
Loading...
