www.mobotix.com • sales@mobotix.com
: Push the MicroSD card into the
card slot as shown, until an audible and perceptible click
indicates it is in place.
. Use the supplied foil or a
lint-free cotton cloth to insert the dome into its seat and turn
it in a clockwise direction.
: Replace the outer shell and screw
all four Allen screws tight using the supplied Allen wrench.
Ensure that the rubber seal is properly positioned.
: If you have inserted a MicroSD card that has already been MxFFS
formatted, you can activate recording under Admin Menu > Storage on External
File Server / Flash Device. Once the camera has been rebooted, it automatically
, it must first be formatted as described
in Section3.5, MicroSD Card Recording.
Push-push function:
insert the MicroSD
card and push it gently
To Next Page
Loading...
