www.mobotix.com • sales@mobotix.com
(MX-OPT-AP)
The On-Wall Set can reliably protect external cables if the cables cannot
be fed in the center below the camera housing. The On-Wall Mount
also provides ample space for extra modules.
(MX-OPT-AP-10DEG)
This On-Wall Set is identical to the regular On-Wall Set, except that the
mounted camera is inclined by 10 degrees. The inclination makes it
possible for the camera to deliver the best images even in demand-
(MX-OPT-IC)
The In-Ceiling Set allows the D24M camera to be installed in suspended
ceilings, for example. This type of installation provides optimal protec-
tion for the camera and reduces the visible profile to a minimum since
only the dome remains visible.
(MX-D24M-Vandal)
The Vandalism Set provides added protection for D24M cameras. The
set consists of a robust stainless steel cover (matt or polished) and
an impact-resistant polycarbonate dome. A camera equipped with
the Vandalism Set is perfectly suited for applications in demanding
environments (such as prisons, trouble areas, train stations, etc.).
The Wall Mount is the ideal solution for mounting the D24M to walls for
indoor and outdoor applications. The camera is completely dust-proof
and resistant to water jets (IP65). The Wall Mount also covers RJ45
flush-mounted sockets and has ample space for additional modules.
(MX-OPT-MH)
The MOBOTIX Corner and Pole Mount is the ideal choice when mount-
ing the MOBOTIX D24M to a pole or building corner. This mount can
only be used in conjunction with the Wall Mount. For poles with a
diameter ranging from 60to180mm.
On-Wall Set (IP65, for
outdoor applications)
10° On-Wall Set (IP65,
for outdoor applications)
Discreet in-ceiling
installation; decorative
outer ring also avail-
able in stainless steel
Vandalism Set (IP65)
Wall Mount made from
sturdy PBT-30GF (IP65)
Outdoor Corner and Pole
Mount made from stain-
less steel (in conjunc-
tion with Wall Mount)
To Next Page
Loading...
