www.mobotix.com • sales@mobotix.com
Outdoors, the D24M is usually mounted on a building wall. In principle, the camera can
be installed without additional wall mounts, although the positional range of the lens may
The cable exit of the D24M is located
in the center of the housing's underside. For more detailed information on the installation
process, see Sections 2.5 and above. The appropriate drilling templates can be found at
A HiRes MOBOTIX Camera Can Replace Up To 6 Conventional Cameras
One Camera For 4 Gas Pumps - Long-Term Recording Without Peripheral Devices
To Next Page
Loading...
