Mobotix D24M - Network Connection and Power Supply, UPS




www.mobotix.com • sales@mobotix.com
 

All D24M models are supplied with power using the PoE standard. The Network Power
Adapter (MX-NPA-PoE-Set) may be used for smaller installations. For larger installations,
it is worth investing in a PoE-capable supply device currently available on the market (PoE
switch/router).
Caution
The

of the network cable for power supply over an Ethernet cable
is

.

such as the NPA Set, Power Box
or Power Rack (MX-NPA-Set, MX-NPR-4 and MX-NPR8/20) are
not
suitable for use
not suitable for use not
with the D24M.
Note
The MOBOTIX D24M can be powered by switches or routers that support the PoE
(Power-over-Ethernet) standard and conform to IEEE 802.3af.
Sections 2.11 and above contain more information on the possible combinations of
connecting the D24M and power supply options.

•
Advantages of centralized backup power supply are available via network
•
Lower
, more cost-eective power consumption
Lower, more cost-eective power consumptionLower
•
Camera does not require an additional network connection
The Network Power
Adapter replaces the
crossover cable when
directly connect-
ing to a computer
The D24M sup-
ports the Power over
Ethernet standard
IEEE 802.3af (PoE)
For the D24M, you
should use the new
blue MX-NPA-PoE-Set
- previous MOBOTIX
network power acces-
sories such as the NPA
Set, Power Box and
Power Rack (MX-NPA-
Set, MX-NPR-4 and
MX-NPR8/20) are
not suitable for use
with the D24M






CAMERA