www.mobotix.com • sales@mobotix.com
. In general, direct installation of the camera without any accessories is always
possible. However, to ensure a flush finish with the surface, you should first install a flush-
mounted wall outlet (space for the connection cable).
If you choose to mount the camera directly to a wall without the MOBOTIX-recommended
wall mount, you should position the camera in the center of the room to guarantee
. In general, direct installation of the camera without any accessories is always
possible. However, to ensure a flush finish with the surface, you should first install a flush-
mounted wall outlet (space for the connection cable).
If you choose to mount the camera directly to a wall without the MOBOTIX-recommended
To Next Page
Loading...
